MSI G321CU curved 144Hz 4K VA with HDMI 2.1
As an Amazon Associate I earn from qualifying purchases made using the “Buy” button at the bottom of this post. Where possible, you'll be redirected to your nearest store. Further information on supporting our work.For both work and play, the ‘4K’ UHD resolution can be very attractive. The ~32″ screen size adds to the immersion and provides a lot of useful screen space, whilst still providing an excellent pixel density. The MSI G321CU is one such offering, marketed towards both PC and console gamers. With the latter in mind, the screen includes HDMI 2.1 for a 120Hz ‘4K’ UHD signal and integrated VRR support on compatible systems such as the PS5 and Xbox Series X. The monitor has quite toned-down styling, with dark matte materials used extensively. The top and side bezels are dual-stage with slim panel border flush with the rest of the screen plus thin hard plastic outer part. The OSD (On Screen Display) is controlled by a joystick at the rear, towards the right side as viewed from the front.
The monitor uses a 31.5″ 3840 x 2160 (‘4K’ UHD) VA panel with 1500R (moderate) curve, drawing you in a bit without feeling unnatural. A 144Hz refresh rate is supported alongside Adaptive-Sync, including AMD FreeSync Premium with 48 – 144Hz VRR range plus LFC. Other aspects of note include a 3000:1 static contrast ratio, 178°/178° viewing angles and 10-bit (8-bit + FRC) colour support. A flicker-free WLED backlight delivers a 300 cd/m² typical maximum luminance and 91% DCI-P3 (90% Adobe RGB, 114% sRGB) colour gamut. Basic HDR10 support is included, allowing the monitor respond in a basic way to HDR content. With 10-bit colour processing and the reasonable gamut put to good use but no high brightness or local dimming requirements.
Low Blue Light (LBL) settings are included to aid relaxing viewing, whilst a 1ms MPRT response time is specified using the included strobe backlight setting. The tilt-only stand can be removed to reveal 100 x 100mm VESA holes for alternative mounting, if preferred. The ports face downwards and include; 2 HDMI 2.1 (48 Gbps) ports, DP 1.4 (with DSC), USB-C (15W PD, DP Alt Mode), a 3.5mm headphone jack and DC power input (external ‘power brick’). 2-system PiP/PbP support is included.
Further details can be found on the manufacturer’s website. The monitor is listed for ~$530 USD.
