ASUS PA248CNV 75Hz 1920 x 1200 IPS with USB-C
As an Amazon Associate and Newegg Affiliate I earn from qualifying purchases made using the “Buy” button at the bottom of this post. Where possible, you'll be redirected to your nearest store. Further information on supporting our work.Most monitors on the market now come in 16:9 or wider aspect ratios, though some find ~24″ screens with a 16:10 aspect ratio suit their needs. For those people, the ASUS PA248CNV is a choice from the manufacturer’s well-known ProArt series. The monitor adopts familiar styling for the series, with a smart look. A rectangular stand base and neck with satin-finish silver plastic contrasts with the dark matte plastic bottom bezel. The top and side bezels are dual-stage, with slim panel border flush with the rest of the screen plus thin hard plastic outer part. The OSD (On Screen Display) is controlled by buttons towards the right side of the bottom bezel, facing forwards.
A 24.1″ 1920 x 1200 (16:10 WUXGA) IPS-type panel is employed. This supports a 75Hz refresh rate alongside Adaptive-Sync, with 48 – 75Hz VRR range assumed. Other points of note include a matte anti-glare screen surface, 1000:1 static contrast ratio, 178°/178° viewing angles and 8-bit colour support. A flicker-free WLED backlight provides 100% sRGB coverage and a 300 cd/m² typical maximum luminance. Low Blue Light (LBL) settings are also included to aid viewing comfort. The monitor responds to HDR10 content, with 10-bit colour processing supported but without a true HDR gamut, luminance level or local dimming required. The monitor is factory calibrated (Calman Verified) with specified DeltaE <2, whilst a 5ms grey to grey response time is specified (caution advised).
A ‘Rapid Rendering’ strobe backlight setting is also included, which can be used without VRR enabled. The included stand attaches via a quick-release mechanism and can be removed to reveal 100 x 100mm VESA holes for alternative mounting. The included stand provides full ergonomic flexibility, including 130mm (5.12 inches) height adjustment and pivot into portrait. The ports at the rear face downwards and include; AC power input (internal power converter with ‘zero watt’ switch), USB-C (90W PD, DP Alt Mode, upstream data), HDMI 1.4, DP 1.2a, DP 1.2a out (for MST daisy chaining), 4 USB 3.2 Gen 1 ports, an RJ45 LAN port and 3.5mm headphone jack. 2 x 2W integrated speakers are also included.
Further details can be found on the manufacturer’s website. Further details on price and availability still to come.
