LG 32UQ750 144Hz 4K UHD VA with HDMI 2.1
As an Amazon Associate and Newegg Affiliate I earn from qualifying purchases made using the “Buy” button at the bottom of this post. Where possible, you'll be redirected to your nearest store. Further information on supporting our work.Most 144Hz+ ‘4K’ UHD models on the market use IPS-type panels which typically offer strong colour output and decent responsiveness, but some prefer the stronger contrast output of VA models. The LG 32UQ750 (32UQ750-W owing to the mainly white rear) offers this experience. HDMI 2.1 is also included, which facilitates a ‘4K’ UHD @120Hz signal for compatible GPUs and games consoles such as the PS5 and Xbox Series X, alongside integrated VRR support. The monitor has familiar homely LG styling, with a silver-coloured stand including cylindrical neck and crescent-shaped base. And a matte black plastic bottom bezel. The top and side bezels are dual-stage, with slim panel border flush with the rest of the screen and a slim hard plastic outer part. The OSD (On Screen Display) is controlled by a joystick which faces downwards beneath the central region of the bottom bezel.
A 31.5″ 3840 x 2160 (‘4K’ UHD) VA panel is used, with 144Hz refresh rate supported. Adaptive-Sync features, including AMD FreeSync Premium with 48 – 144Hz VRR range plus LFC. A 2500:1 static contrast ratio, 178°/178° viewing angles and 10-bit colour support is specified. A flicker-free WLED backlight yields a 90% DCI-P3 colour gamut and 400 cd/m² typical maximum luminance. Low Blue Light (LBL) settings including ‘Reader Mode’ feature for a potentially more relaxing viewing experience. The monitor responds to HDR10 content in a basic way, without a particularly high brightness or specified local dimming. The reasonable colour gamut can be put to potentially good use alongside 10-bit colour reproduction, however.
A 4ms (pinch of salt required) grey to grey response time is specified. The included stand offers tilt, height and pivot adjustment and attaches via a quick-release mechanism. It can be removed and an alternative solution used with 100 x 100mm VESA mounting. The ports face backwards in a recessed region to the right of stand attachment point and include; 2 HDMI 2.1 ports, DP 1.4 (with DSC), USB-C (65W PD, DP Alt Mode, upstream data), 2 USB 3.0 ports, a 3.5mm audio output and DC power input (external ‘power brick’). 2 x 5W MaxxAudio speakers are also included.
Further details can be found on this manufacturer spec sheet (PDF). The monitor is listed for ~$700 USD.
